This is an unofficial build of Omni Rom based on KitKit 4.4.2. There is no official support for the d2att (d2 variants in general). Props to androidsftw for picking apart what was needed for our d2s.
I am not the rom builder - GideonX is the Baker and I am the thread maker/maintainer. These next few words are from him.
GideonX : I am not the dev of this rom, all I did was add in necessary device/vendor/d2 files for d2att. This is not a port, everything has been built from source.
As with all things root, I am not responsible for anything that happens while flashing this rom. You take responsibility for your actions. Nandroid is your friend.
----------------------------------
Downloads:
Omni Rom - Droidhype Roms
GAPPS 4.4.2 - PA 0-day
SuperSU - Chainfire
Kernel (optional) - BMS
----------------------------------
HOW TO INSTALL
1. Factory Data reset
2. Wipe System/Data/Dalvik/Cache
3. Install ROM zip from Sdcard
4. Install GAPPS zip from Sdcard
5. Install SuperSU from Sdcard
6. Reboot to home screen to confirm good flash
7. (Optional) Reboot to recovery and flash kernel
If you run into issues flashing, make sure you are using CWM 6.0.4.3 recovery.
Join the BMS G+ Communitywhich will have quicker release info in the future for all things BMS and roms.
Enjoy! :highfive:
Changelog in 3rd post
XDA:DevDB Information
Omni Rom, a ROM for the AT&T Samsung Galaxy S III
Contributors
SlothlyDX, GideonX
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Alpha
Created 2013-12-30
Last Updated 2014-01-02
I am not the rom builder - GideonX is the Baker and I am the thread maker/maintainer. These next few words are from him.
GideonX : I am not the dev of this rom, all I did was add in necessary device/vendor/d2 files for d2att. This is not a port, everything has been built from source.
As with all things root, I am not responsible for anything that happens while flashing this rom. You take responsibility for your actions. Nandroid is your friend.
----------------------------------
Downloads:
Omni Rom - Droidhype Roms
GAPPS 4.4.2 - PA 0-day
SuperSU - Chainfire
Kernel (optional) - BMS
----------------------------------
HOW TO INSTALL
1. Factory Data reset
2. Wipe System/Data/Dalvik/Cache
3. Install ROM zip from Sdcard
4. Install GAPPS zip from Sdcard
5. Install SuperSU from Sdcard
6. Reboot to home screen to confirm good flash
7. (Optional) Reboot to recovery and flash kernel
If you run into issues flashing, make sure you are using CWM 6.0.4.3 recovery.
Join the BMS G+ Communitywhich will have quicker release info in the future for all things BMS and roms.
Enjoy! :highfive:
Changelog in 3rd post
XDA:DevDB Information
Omni Rom, a ROM for the AT&T Samsung Galaxy S III
Contributors
SlothlyDX, GideonX
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Alpha
Created 2013-12-30
Last Updated 2014-01-02